The iPhone 13 series is now available! You may have recently upgraded to a powerful iPhone 13 or perhaps gotten a great deal on an iPhone 12 or XS, and you already have an Apple Watch synced to your previous iPhone. It’s only reasonable that you’d want to sync your Apple Watch with your brand-new iPhone.
However, because the Apple Watch data is not immediately backed up on iCloud, certain portions of the procedure may appear unclear at first. Its backup is done through your iPhone, so you’ll need to take a few precautions to protect your Apple Watch data before linking your Apple Watch with your new iPhone.
How Do I Unpair Apple Watch from Old iPhone?
If you have an older iPhone and wish to switch your Apple Watch to a new one, you may unpair it from your old phone using simple procedures.
When you disconnect your Apple Watch from your previous phone, all of its content is removed, and the watch is reset to factory defaults. It’s good to back up your old phone’s data before starting.
Ensure your new iPhone and old Apple Watch are connected to the same WiFi network and have at least 50% battery life before connecting.
To sync your new iPhone with your old Apple Watch, make an iCloud backup of your old device. Under the iCloud settings, enable the health symbol and encrypt backups before transferring devices. It would help if you also backed up your old iPhone before replacing it to safeguard the security of your data.
What to Do When You Want to Transfer to a New Apple Watch
Is it time to set up your new iPhone? Well, on your new iPhone, sync your Apple Watch info. Once the watch is set up, you may check on its status and transmit data to your new iPhone using the Apple Watch app on your iPhone. Here are a few steps to take:
- To begin, detach your old watch from its strap. That will back up all of the information on your watch.
- Align your new watch in the viewfinder after that. To recover the data from your old watch, select “Restore.”
- A notification will appear informing you that a backup has been generated. Choose “Restore” from the drop-down menu and follow the on-screen instructions.
- You may now transfer your data to your new Apple Watch after completing this step.
You may also transfer your previous Apple Watch’s cellular plan to the new one. However, you must first unpair your previous Apple Watch. After that, connect your Apple Watch to your iPhone. Once connected to your iPhone, go to ‘Set up Cellular’ and choose the cellular plan you wish to transfer. This is the most difficult phase, yet the process needs to be completed.
How to Pair Your Apple Watch to Your New iPhone
After you’ve set up your new phone, follow these steps to connect your Apple Watch to your iPhone:
- To switch on your Apple Watch, press and hold its Side button until the Apple® logo appears.
- Hold your watch near your iPhone and wait for the Apple Watch pairing screen to appear on your iPhone.
- When prompted to “Use your iPhone to set up this Apple Watch,” press Continue on your iPhone—you can start the process manually by opening the Watch app on your iPhone and selecting All Watches > Pair New Watch.
- Set Up for ‘Myself’ by using the Set Up for Myself button. While doing this, keep your watch and phone close to each other.
- To link the two devices, point your iPhone’s camera at the Apple Watch face when asked by the Watch app.
- To restore your watch’s data from a backup, tap Restore from Backup. Your Apple Watch may need a software update.
- To finish the setup, follow the prompts on your iPhone.
How to Use iTunes to Transfer Health Data from your Apple Watch to a New iPhone
You must encrypt your iPhone backup when using iTunes (Windows and macOS Mojave and lower) to ensure that your health data is included.
1st step: Make an Encrypted Backup
- Connect your iPhone to your PC using iTunes.
- Create a new window in the Finder app (macOS Catalina+)
- In the Finder’s Sidebar, choose your old iPhone from Location.
- Select Encrypt local backups from the drop-down menu.
- Create an encryption password at the prompt and choose whether to keep it in your keychain or write it down/save it someplace.
- Your backup begins when you confirm your password, and it overwrites and encrypts any prior backups.
Step 2: Pair the Apple Watch with Your New iPhone
- Wait for the Welcome note screen to appear on your new iPhone.
- Choose your language and region, connect to a WiFi network, set up a password and Face ID/Touch ID, and follow the on-screen instructions.
- Select Restore from Mac or PC when you reach the page where you can pick how you wish to transfer applications and data.
- Connect your new iPhone to the computer via the USB cable.
- When your device displays in Finder or iTunes, choose it.
- Select Restore Backup.
- Examine the backups listed and select the most current or relevant.
- Restore your encryption passcode or get it from your keychain by tapping Restore.
- Wait for the restoration to complete while keeping your iPhone connected to your computer.
- Turn on and attach your Apple Watch and iPhone to power; after your iPhone is finished, set them next to each other.
- Check to see whether WiFi and Bluetooth are turned on.
- On your iPhone, open the Watch app.
- Start Pairing by pressing the Start button.
Is it True that Unplugging an Apple Watch resets it?
Is it possible to reset your Apple Watch by unplugging it from your iPhone? If that’s the case, you’re probably wondering what this signifies.
Unpairing your Apple Watch via the iPhone app does not delete any data, but unpairing it directly from your smartwatch does. This step wipes the data on your watch but does not remove the activation lock, meaning you can’t connect it with another device.
To unpair your Apple Watch, make sure it’s connected to an iPhone first. Keep it if it’s coupled with a cellular plan. If it isn’t, get rid of it. Next, enter your Apple ID password. Once you’ve input this information, your Apple Watch will begin backing up your iPhone’s most recent data.
After that, disconnect your existing iPhone and restart your Apple Watch. It’ll erase all of your data from your iPhone and reset your Apple Watch to factory defaults when it’s finished.
Does Unpairing Erase Data on Apple Watch?
You might be wondering if unpairing your Apple Watch would erase data on it. You’re erasing all the info from your Apple Watch when you unpair it. While Apple makes a backup of your watch’s data before removing it, the procedure also erases all its data. Fortunately, you can reinstall your watch using the backup. All you should do now is follow these steps correctly.
- You must first unpair your iPhone to deactivate Activation Lock and reset your watch to factory settings.
- Your Apple Watch will be completely erased of all data and media. However, it will not terminate your cellular plan, so contact your carrier to cancel your subscription before attempting to remove Activation Lock.
- Before you can accomplish this, you’ll need to know your Apple ID and password. After that, follow the on-screen directions to reset your passcode, and your watch will restart.
Make sure your iPhone is updated before you begin. If you’re using an older iPhone, unpairing your Apple Watch will erase all of the data saved on it. You’ll need to create a fresh backup in this case, which is normally a newer version of watchOS.
It’s vital to remember that this will result in the loss of recent activities. If you need to recover data, you can do so from the backup, but be aware that you will permanently lose any data recorded on your watch.
Why Am I Unable to Connect My Apple Watch to My iPhone 13?
You are in the correct spot if you’re having trouble connecting your Apple Watch with your iPhone 13. Here’s how to fix the problem, whether you have a brand-new iPhone 13 or an older model. You’ll be asked for your Apple ID or password every time you link the two devices. You must provide these credentials when requested to link your watch.
To fix this issue, turn off Airplane Mode on both devices first. Bluetooth and Wi-Fi connect the two devices, and Airplane mode may block pairing. However, you can turn it off in the Control Center.
Swipe up and pick the Control Center icon to turn off Airplane Mode. Restart your iPhone and Apple Watch once you’ve switched off Airplane Mode and attempt pairing again.
It might be a hardware issue if you’re still having trouble pairing your Apple Watch with your iPhone 13. If you can’t connect your Apple Watch with your iPhone 13, take it to Apple’s Genius Bar to see if an internal component is broken. If this is the case, Apple has a replacement component available.
A valid Apple ID is required before pairing your Apple Watch with your iPhone 13. It’s also required that you have a working cellular data connection. Note that Bluetooth must be enabled on both the Apple Watch and the iPhone. Hold the Side button for some seconds after pairing.