Suppose you have accidentally broken the screen of your Samsung TV. In that case, you may need to factory reset it to restore the system to its original settings and ensure that you do not run into further problems. If you are unsure how-to factory reset your TV, then this guide will help you with the necessary steps to get your Samsung TV working again without any problems.
It’s easy to factory reset your TV if you know what button combination or menu path to use, so follow these instructions carefully, and you should be able to restore your TV in just a few minutes.
What is Factory Resetting of Your Samsung TV?
A factory reset (sometimes known as a hard reset) clears all settings and data from a device. After you perform a hard reset, it’s as though you purchased that device for the first time and set it up yourself.
This can help fix minor software problems that don’t have to do with restoring your settings, such as connectivity issues or an app crashing on startup. But factory resets are particularly useful when recovering from severe hardware damage.
In many cases, wiping all personal data off of your Samsung TV can do more harm than good—but you won’t be able to access any settings without one. The process varies depending on which model you own, but we’ll cover how to factory reset most Samsung TVs in a few steps below.
A Step-by-Step Guide to Resetting a Samsung TV with a Broken Screen
Unfortunately, it’s not easy to find a person who can fix a large piece of electronics. So, when that’s not an option, you can follow a few tips to factory reset your Samsung TV when you have no other choice but to do it yourself.
Here are some simple steps that will guide you through it. Before you begin, ensure all connections have been removed from both sides of your television and any personal data backed up on a USB drive or other storage device.
Step 1: Turn Off the Television by Pressing Down on the Power Button
- Located on your TV set’s back is a power button. Press it once.
- The power button may be labeled “On” instead of just “Power,” but either way, press it.
- If there are no buttons on the back of your television, use an object with a sharp edge and insert it into one of the small slots near where you plug in cords (e.g., HDMI cable). This will turn off your Samsung smart TV.
- Remember that some TVs come with remote control and can be turned off by pressing a series of buttons on that device. Consult your owner’s manual for specific instructions.
As soon as you have turned off your television, unplug it from its electrical outlet. Do not touch any part of the television until all components have cooled down completely. While most modern televisions do not get hot enough to cause damage when they are powered down properly, leaving them plugged in for too long could result in damage or injury due to overheating.
Step 2: Wait 10 Seconds and Turn it Back on Again
A dead battery is a common problem with a Samsung television’s remote control not working. If you have another remote with similar buttons, like a universal or something, you can use it to power on your television and hold down two different buttons.
The first button should be the menu, and keep it held down as you turn on the power with the second button. If you are still not able to reach your menu, try repeating step 1 before moving on to Step 3.
This time, leave both buttons pressed for 15 seconds instead of 10. You may need to press them together more than once. Do so until you see some reaction from your television, such as text appearing on-screen or a picture being displayed in black and white.
When you see something like that happen, release both buttons at once. Your display will probably return to normal after a few seconds, but sometimes it will take longer than others.
Step 3: When You See the Recovery Menu, press OK on Your Remote Control
On every Samsung Smart TV, there are 5 ways to bring up the recovery menu. One way involves turning on your TV and repeatedly pressing the menu until you see it appear on-screen.
The other four involve physical actions. These might be easier if you can’t use your remote control. Press and hold down the power button for 10 seconds to get started. Then press and hold down both volume buttons for 10 seconds, release them and press the power button again for 3 before releasing it.
Next, unplug your TV from its power source for 30 seconds before plugging it back in to turn it back on again. Unplugging your TV from its power source for 30 seconds before plugging it back in will trigger the recovery menu.
After doing one of these five things, you should see a message asking if you want to enter safe mode. Press OK on your remote control when prompted. After entering safe mode, look for the Factory Reset option under Settings. Select it with your remote control and follow instructions on-screen to reset your TV.
If all else fails, try searching online for directions specific to your TV model.
Step 4: When Prompted to Enter an Access Code, Use 000000
Press and hold the power button, press 8, release both buttons and press the power button again. You should see a Factory Reset message on-screen. Press 9 on your remote to confirm that you want to reset your television.
When prompted for an access code, use 000000. If you want to cancel or exit without resetting anything, do not press any numbers on your remote control or keyboard; just wait 30 seconds for system settings to restore the progress bar (if present) or prompt the message to disappear from the screen.
Once you have confirmed your selection, press EXIT, and the television will automatically turn off after it resets itself.
It takes approximately 2 minutes to complete these steps. Once completed, all of your previous channels and inputs will be restored. This function does not delete any user-programmable settings such as parental controls or V-Chip information stored in memory slots 1–4 (if applicable).
Your old PIN (s) will also be restored after a factory reset has been performed. It can take 15 minutes for these changes to take effect once you have completed the above step.
Step 5: Select Reset Device
If there are multiple screens on your device, select which screen you want to reset using the Select a device option. If only one display appears on your device, skip Step 5 and go directly to Step 6.
You will be prompted whether or not you’d like to keep or delete personal data from your Google Account and SD card(s). Select Delete personal data, then select RESET DEVICE.
Step 6: Press OK When Asked Whether You Are Sure You Want to Continue
At this point, go through the on-screen instructions on your device. Once you see a message saying, “The factory data reset has been completed successfully,” press OK again.
Ensure you turn off your TV and unplug it from power for one minute before reconnecting the power cord and turning the TV back on. Wait another 15 minutes before proceeding.
Congrats! Your device should now be just as good as when you bought it!
The Benefits of Resetting a Samsung Smart TV
The factory resetting of a Samsung TV serves several purposes, but most notably, it keeps sensitive information out of harm’s way. You can ensure that no one has access to your data or photos stored on your device by doing a clean install.
By restoring settings to their default state, you’ll have more consistent access to apps and entertainment from streaming sources like Netflix and Hulu. Ultimately, wiping everything from your device and starting fresh will result in a much better experience for everyone involved – including yourself.
How Should I Fix a Broken Screen of My Samsung TV?
If you recently dropped your Samsung HDTV, it may have come down on its screen, causing damage and making it impossible for you to see anything that’s on. First things first: Turn off any nearby appliances.
This includes other TVs nearby. Though they probably won’t have a meltdown after getting zapped by an electric shock-like yours, it’s best not to risk it.
Next, pull out all of the cords running into and out of your set so that no electricity runs through them while you work. Grab a thin object (like a butter knife) and start jiggling behind your set. You should be able to feel around until you find something—a screw or some plastic—that will move when you push against it.
That’s how you know where to pry open your TV set. Once inside, unplug everything from your television except for one cord—the power cord.
Once everything else has been disconnected, you can fix the screen. Don’t shy away from asking for expert assistance if you don’t understand how to fix the broken screen.
Is it Expensive to Replace a Broken Samsung TV Screen?
The answer depends on how big it is. If you have a small TV (37-inch or smaller), you could pay anywhere from $150 to $200 for a replacement screen. Larger TVs will cost more—anywhere from $300 to over $1,000.
These screens are so expensive that there’s value in learning how to fix them yourself. If you know what parts and tools you need, it may be possible for you to replace your broken screen without spending a dime.
It’s a noble idea to back up any valuable data before replacing your screen. To ensure everything goes smoothly with your next television purchase, do some research on model reviews.
Suppose you have accidentally broken the screen of your Samsung TV. You may need to factory reset it to restore the system to its original settings and ensure you do not run into further problems. If you are unsure how-to factory reset your TV, then this guide will help you with the necessary steps to get your Samsung TV working again without any problems. It’s easy to factory reset your TV if you know what button combination or menu path to use, so follow these instructions carefully, and you should be able to restore your TV in just a few minutes!