The Mount System option for the Recovery Menu on the Samsung Galaxy J7 NXT allows you to mount the NTFS file system, including those in Micro SD cards (for devices with expandable memory). You can easily read, write and edit files on your phone’s SD card as if it were a USB flash drive! If you need more information about the mount system option and how it works, look no further than this page!
What is the Mount System Option for the Recovery Menu on the Samsung Galaxy J7 NXT?
This option lets you replace the system software with a new one. It’s useful in cases where your phone isn’t functioning properly or if you want to update the system software. You’ll require a CP with an internet connection and a USB cable to do this. You may also opt for a wireless connection, but it will take longer.
Note: Ensure your phone has at least 50% charge before starting. If not, plug in your charger beforehand, so you don’t interrupt the process by running out of battery power during installation.
An Overview of the Mount System Option for the Recovery Menu
In the recovery menu of your Samsung Galaxy J7 NXT, there is an option called Mount System or Mount as Read-Write. Most users ignore this option because they believe it is useless. However, if you are an advanced Android user, this option can be very helpful and useful to you at times.
You can use the Mount System Option on the Samsung Galaxy J7 NXT when you want to install a custom ROM on your phone, modify the system files somehow, or even format your SD Card and remove all the data from it.
When you press Volume Up, Volume Down, Power Button, and Home Button and then release them simultaneously, you will be taken to a recovery menu. The first option in this recovery menu is Mount System.
Selecting Mount System will mount your system partition and cache in read-only mode so you can access any data left behind. This is helpful if you have had an issue with your device or have gotten a new device but want to move all of your data over without having to back up everything again.
How to Use the Mount System Option for the Recovery Menu
To use the Mount System option, you must be in recovery mode. Here is how to enter recovery mode:
- Turn your phone off, then press and hold both Volume up + Home key + Power key simultaneously until a blue screen with an Android robot appears.
- Then choose Wipe data/factory reset by using the Volume down button.
- Press the Power button to confirm.
- Next, choose Yes by pressing the volume up button and then press the Power button again.
- When that’s done, choose Reboot system now by pressing the Volume up button, then press the Power button again.
Note: If this doesn’t work, try wiping the cache partition instead of Data/Factory Reset, which is also under the same menu.
Discovering the Mount System Option in Recovery
What is a mounting system? A mounting system is a method of file system management that allows users to access files while they are mounted. The most common example of this type of file system management would be when you connect an external hard drive.
Normally, you would need to unmount the drive to change any files on it or save changes. With a mount system, you can do both simultaneously if the device has been set up properly beforehand.
What does this mean to my phone’s recovery menu? It’s important for people who use their phones heavily or use high storage apps like games or video editing software to regularly back up their data in case something goes wrong.
Some phones come with built-in backup options, but others may not. If you’re worried about your data being lost, using the recovery mode to create a backup of your phone could help get you back on track in case anything happens to your original backup copy.
You’ll want to enter the recovery mode by holding down the power button until there’s a Power Off option, then select Reboot. Once there, select Recovery Mode, then chooses Backup and Restore.
Before selecting Backup, you must ensure that your external memory card has enough space.
Access Recovery by Turning Off Your Phone Completely
Turn off your phone completely. To do this;
- Press and hold the power button until you see a screen that says power off.
- Swipe across this screen to turn off your phone.
- Wait about 20 seconds before turning your phone back on: This will give enough time for any data being transferred from RAM (random access memory) to flash storage to finish. You might lose data if you turn your mobile device back on too soon.
- Hold the volume down key, and then press the power button to turn on your phone. An Android logo should greet you with an exclamation point in a triangle; this means that recovery mode has been reached.
- Hold down both volume keys until you see the Wipe cache partition at the bottom of the menu.
- Click Wipe cache partition once.
- Click Reboot system now at the bottom of the menu after waiting 10 seconds for cache wipe operation to complete. You should now be able to use your mobile device normally again!
Press, Hold, and Select (Volume down + Home Button + Power Button)
While the phone is off, press the Volume Down, Home, and Power buttons simultaneously. This will bring up a menu of recovery options, including the Mount system, which can format your device’s internal storage.
Once this has been selected, you’ll need to choose Yes and confirm by selecting Yes again. Your device will reboot automatically after this point with the formatted partition data.
You can also enter download mode by pressing, holding, and selecting (Volume down + Home button + Power button) again. When you do this, the phone will turn off. Then hold all three buttons again until you see a warning screen with a yellow triangle. It would help if you pressed the volume-up key to go back into download mode.
Click on Mount System and Select Apply Update from ADB
One of the updates that have been released for the J7 NXT is a new mount system. There are two ways you can use to update it. The first way requires a PC or laptop with an Android SDK or ADB installed.
- Plug your device into your PC, turn off USB debugging (if enabled), and select this option from the Mount system.
- Next, click apply update from ADB, then choose an .apk file from your downloads folder.
- After clicking OK, wait until your phone reboots.
Note: If you don’t have access to a computer at the time of updating, then another option is turning off both developer options and OTA updates in Settings > About Phone > Software Updates > Update Options (in some cases).
Download Updates from a PC by Connecting Your Device to an Unlocked PC with the Internet Connection
Please note that this will only download the latest software updates. If you have not yet backed up your data, do so before proceeding with a software update. Once you confirm all of your data has been backed up, follow these steps to download an update from a PC:
- Connect your device to an unlocked PC with an internet connection and ensure both devices are connected to a power source.
- Navigate to Settings > About Phone > Software Updates > Download Updates From PC
Run ADB Sideload Update.zip as an ADB Command in CMD/Terminal
You can update your phone using ADB with a command line tool. To do so, you will need to have ADB installed on your computer, connect your device using a USB cable, and execute the following command in CMD/Terminal:
- ADB sideload update.zip ADB sideload update2.zip
- ADB sideload latest_update.zip
There are three options under the Mount System option of the recovery menu on the Samsung Galaxy J7 NXT:
- Mount system as read-write.
- Mount system as read-only.
Read-write allows you to install apps on your phone from other sources outside the Google Play Store, which will be listed in both the app drawer and home screen.
Read-only is used when downloading a system update over an encrypted connection (example: OTA). In this case, when rebooting your phone after installing it, if there was an error during installation, you’ll still be able to use your smartphone normally without any changes being made to its software.
The Mount System option provides a more advanced way of fixing software issues. This can be done by resetting the phone’s system files so that any corrupted or broken software can be replaced. Though the process sounds complicated, it’s not too difficult with a few steps.
This process will reinstall your phone’s original operating system and delete all data from your device. You’ll need a backup to restore lost data after this process is complete, but it should also fix any software-related issues you might have on your device.
The first thing you’ll need to do to mount your phone’s system files is shut off your device by holding down the power button until you see an off prompt on the screen.
I’m William Shands, a tech enthusiast with a Bachelor’s in Information Technology from Georgia Institute of Technology. As an IT Support Specialist at Urban Outfitters, I’m immersed in the world of technology daily. My passion for apps led me to create TechBiva.Com, where I offer detailed reviews of the latest smartphone apps and games. Join me in exploring the ever-evolving landscape of mobile technology!