How to Disconnect Wi-Fi from Direct TV

How to Disconnect Wi-Fi from Direct TV in 6 Easy Steps

For many people, watching television doesn’t mean much without an Internet connection, especially in this era of streaming shows and movies from services like Netflix and Hulu Plus. Direct TV customers can stream their entertainment to their smartphones, tablets, laptops, or other connected devices by using the Go Direct app that comes with the satellite service. However, there are ways to do this without paying $35 per month for Internet access as part of your package through Direct TV. Here are six tips on How to Disconnect Wi-Fi from Direct TV in 6 Easy Steps and still be able to enjoy streaming media on your electronic devices.

Why Should I Disconnect Wi-Fi from My Direct TV?

Your Internet Provider can see what you’re watching. By connecting your television to a Wi-Fi router, such as a DVR or cable box, your Internet service provider (ISP) can monitor and record everything you watch.

A recent leak of Yahoo webcam chats revealed that ISPs also record their customers’ activities. Even though it’s been reported that Verizon stopped recording user activity two years ago, many providers still do it and use their records for data analysis and advertising purposes.

There are ways around these invasions of privacy by going off-the-grid with rabbit ears and watching over your network – but only if you know how to do it. We’ll show you how to disconnect your wireless router from Direct TV in six easy steps.

Can the Direct TV Work Without Wi-Fi Connection?

Technically speaking, yes. Suppose you don’t have internet service at home but have a high-speed connection from your phone provider (3G/4G LTE); you can still stream content through Direct TV.

However, we do not recommend that option as it might use up your data plan. It will consume your cell phone battery life faster than expected since it transmits live television programming through its data channel.

What’s more, when there are no available high-speed internet connections nearby, that could result in buffering issues and hiccups while trying to watch shows on your schedule? It would not be delightful when those two things happen—either while you’re watching something or planning on watching something!

You should try to connect your streaming device directly to your modem instead of using a wireless connection for all of these reasons. That way, you won’t have any problems with connectivity during prime time viewing hours. You also won’t need to worry about losing any of your favorite shows because they weren’t recorded due to bad internet connectivity.

If you want a smooth experience without worrying about whether or not you’ll lose signal mid-streaming session, just plug in an ethernet cable between your streaming device and modem for maximum reliability and convenience.

How to Disconnect Wi-Fi from Direct TV in 6 Easy Steps: A Step-by-Step Guide

It might seem difficult to cancel your DirecTV service and disconnect your Wi-Fi, but it’s easier than you think. Follow these six steps before calling customer service to disconnect Wi-Fi from your DIRECTV system successfully.

Step 1: First, go to your DirecTV receiver and press MENU. From there, select Settings and then Wireless Network. Now your DirecTV receiver should be showing that it is connected wirelessly. Press OK to continue.

Step 2: Navigate down and select Utilities>Network Status: You should see all your available wireless networks. The list should include your ISP and any other options you may have. If you only see one network, likely, your router is already set up for Automatic connection. If it’s not, click on your default connection and change it to Manual.

This will force your device to look for an alternate connection, like cellular data or Ethernet. You can check each of these settings by going into System Preferences>Network Settings>Ethernet or Wi-Fi.

Once changed, press OK and save changes by pressing Command+S on a Mac or Control+S for Windows.

Ensure you restart all devices connecting through that network. If you still don’t see anything else, try rebooting your modem and router.

Step 3: After selecting Network Status, you should see Wired and Wireless listed on your device. Right-click on Wireless, click Properties, then click Configure Wi-Fi link. You will be taken to a screen with options for each wireless profile; choose Custom and put a checkmark next to Disable SSID Broadcast.

Save your changes by clicking OK. Restart if requested, and confirm any additional dialogue boxes until you are back at Device Manager again, where you can reinsert your new network card driver software.

Step 4: Press the blue arrow on your remote pointing at Wired. You should see a down arrow pointing toward your cable box. Press that down arrow until it shows Disconnected. That’s it; you’re done!

Step 5: Select Ethernet – Disable then Save. You have now disabled your Wi-Fi connection. Now, you should see a message that reads Disconnected. Double-check your work and try again if you see any other message. Otherwise, select Save, then move on to step 6. You can always enable your wireless network at a later time by following these steps in reverse order.

When you have completed steps 1 through 5, disable your wireless connection and set up your Ethernet connection. One must be disabled before proceeding with further setup, so choose which one you would like to use first and complete those steps before coming back here.

Make sure to proceed with Step 6 only after setting up an Ethernet connection – do not go back and forth between a wired and wireless setup once you begin it!

Step 6: Repeat this process for Wireless. It will look similar but will say WIRELESS instead of ETHERNET on your screen. Be sure you save your settings by selecting Apply.

Exit out of settings and return to your home screen. If you haven’t connected via Ethernet, you will need to do so now.

For other connections such as cable boxes or Blu-ray players, proceed directly. Pressing Settings on your remote will create an options menu where several configurations can be made. Select Set Up Your Device & Content.

From here, select Set Up a New Device – Input Devices – Wireless (For DirecTV): This is where you will configure your system for wireless connections with devices such as mobile phones and tablets.

Be sure that both boxes are checked here. This is used if you have more than one connection point to stream programming.

Disconnecting the Router from the Direct TV

First off, you need to unplug your direct tv box. Now that you have done that take a look at your router. The thing needs power, and so if two plugs are going into it, one of them must be coming from your direct tv box.

So, disconnect that plug by pulling on it and twisting slightly until it comes out of its socket. You will probably notice that there is still a wire attached to it, but don’t worry about that right now because we will get back to it later.

Grab an Ethernet cable and connect one end of it to any open port on your router. Then connect the other end of it to an open port on the device you want to be connected directly to your internet source instead of through your Wi-Fi connection.

Benefits of Connecting Direct TV to Ethernet

You’ll ensure a stable and reliable Internet connection by connecting your DIRECTV receiver to an Ethernet cable. In addition, you can take advantage of DIRECTV’s Genie system, which offers advanced streaming services, like voice control and simultaneous streaming on multiple devices.

Lastly, using Ethernet ensures that your home network is more secure than if it were connected via Wi-Fi. By physically connecting your receiver to a router with an Ethernet cable, you will prevent potential intruders from accessing your Internet service via unauthorized methods (e.g., wireless access points).

This is particularly important for homes with teenagers who spend a lot of time on their laptops or smartphones—both of which typically lack adequate security controls.

Ethernet vs. Wi-Fi: Which is Better When Connecting to Direct TV?

Choosing between Ethernet and Wi-Fi when connecting to Direct TV ultimately comes down to cost. Both are fast and can transfer large amounts of data, but Ethernet is more secure and generally less expensive.

However, Ethernet runs on wires rather than a wireless network, meaning you’ll need a direct connection—and suppose your router is far away from your device, you may be better off with Wi-Fi.

If it’s on your budget, go with Ethernet. It will save you in the long term because you won’t have to replace equipment or pay for service calls due to dropped signals. But if you prefer convenience over anything else (or don’t want a wire running through your house), go with Wi-Fi. It’s just as fast as Ethernet and requires no extra equipment.

The Final Thought

Netflix and Hulu have unveiled stand-alone streaming video services that don’t require a traditional cable or satellite subscription. (Hulu with Live TV is available on a limited selection of devices than Netflix).

Depending on where you reside, they could be an attractive alternative to traditional pay TV. Since AT&T acquired Time Warner and its media properties, starting with HBO, a new option called DirecTV popped up. DirecTV streams live feeds of more than 100 channels for $35 per month.

With so many changes happening so quickly, we thought we’d share some information about how you can disconnect your home’s Wi-Fi connection from your DirecTV!


Posted

in

,

by