How To DDoS A Router As A Skilled Hacker

Are you interested in learning how to DDoS a router as a pro? There is nothing ethical in launching DDoS, but this page is educational. You can’t talk about DDoS without mentioning his junior partner, the DoS. While the acronym DDoS means Distributed Denial of Service, DoS stands for Denial of Service. DDoS and DoS are potent attacks on the server or network by directing excessive traffic aiming to cripple it down. 

Are There Differences Between DDoS And DoS?

Both activities aim towards attacking a website or service with voluminous information that is hard to process. Although the two have a similar objective, DDoS launches its attack from multiple sources, whereas DoS attacks the victim by flooding the information from a single source.  

Due to the nature of the attack, DDoS is more potent than its partner in crime, DoS.

Imagine a scenario where your power supply is excessive. In such a scenario, it destroys all electronic and lighting devices connected to it as it has no other escape route. This is what is replicated in your router when it is bombarded with excessive information than it can process.

Why Should Anybody DDoS A Router?

DDoS A Router

DDoS attacks are destructive and difficult to control. From the economic perspective, the attacks don’t make sense. However, cybercriminals use these attacks as a weapon to slow down competitors. The criminals might target a cyber-security tool hosted by a specific site or decapitate an online business competing with their products.

The other reason cybercriminals attack networks with distributed Denial of service is to extort. In this scenario, the victim is disabled until payment is done for the attack to stop.

Others use the attack as a smokescreen and infect the victim with malware, or worse still, extract the desired information.

Did you know that cybercrooks might bombard traffic to your router without any motive? You might wonder why anybody in the right frame of mind can waste time and resources launching an expensive multi-attack such as DDoS to your router. However, note that some crooks attack services for fun, test their abilities, or cause destruction.

Can You DDoS Someone Cyber Crook Style? 

 If you have the resolve, there are numerous tools to DDoS any router in the badass style. You are not limited to a single way of launching your Denial of service attacks, but you rather have several methods at your disposal.

Even armatures without hacking experience can cause considerable harm if they access the right tools. You can hire the tools and hit your target hard to achieve your desired goals.

Here is how you can attack your target’s router successfully:

1. DDoS A Router Using Botnets

Botnets is s term used to describe computers or internet-connected devices that bear malware and can be controlled by a central computer known as the command and control center.

Bigger bonnets compromise millions of devices and place them under their web without their owners’ knowledge. 

Cybercriminals use botnets in conducting a wide variety of unlawful activities such as cryptocurrency mining, phishing, or pushing spam emails.

Some botnets are available for hire if you can afford them. With your hands on these compromised devices, you can launch a DDoS attack of a larger magnitude.

2. Attacking A Router Using DDoS Tools And Programs

If you are a low-scale hacker, chances are you cannot afford the luxury of botnets. Your only possible option is using your computer for the task. It would help if you had unique tools to direct the traffic to your targeted router to accomplish the job.

Though the amount of traffic sent by one computer is small, the effect is magnified by cloud sourcing a few thousand other users. Here, a hacker gets smarter by asking followers to download a specific tool and stay active on a messaging platform like IRC at a designated time. They then launch an attack simultaneously to bring down the targeted router or other devices. 

Here is a list of tools that hackers utilize in carrying out DDoS attacks:

1. Low Orbit Ion Cannon (LOIC).

2. XOIC.

3. HTTP Unbearable King (HULK).

4. Tor’s Hammer.

5. R-U-Dead-Yet.

6. Layer 7 DDoS Simulator (DDSSIM)

3. Using A Cmd To DDoS An IP

This method uses a fundamental denial of service method christened the “ping of death” to hack into smaller devices like routers and a single computer. It uses a command to infiltrate and bombard the targeted device with data packets.

The ping of death can’t attack massive targets. The attacks are effective against smaller targets such as:

1. A Wireless Router: When you flood the router with packets of data, you hinder its ability to send traffic to all connected devices. The endgame is cutting internet to all devices connected to the router.

2. A Single Computer: To send a ping of death to a single computer requires you to acquire its IP address and use it to wreak havoc on the device. 

A ping of death might be a basic and small attack that can only harm small devices like routers. Still, if you use multiple computers to simultaneously send the ping of death, you will cause massive and irreparable damage to smaller websites.

4. Teardrop DDoS Router Attacks

The information transmitted between a client and a server is voluminous that it can’t be sent as one piece. For easy handling, data is broken down into small packets that reassemble once they reach the server.

The server is equipped with a parameter known as “offset,” which rebuilds the information correctly.

Teardrop DDoS attacks take advantage of this process by sending confusing data to the server. The data sent contain dysfunctional or overlapping offset parameters.

When the server receives such data, it tries to rearrange it in vain; due to the compromised offset parameters, the end game is the grinding down of the router or website.

5. Amplifying DDoS Attack On A Router

You can maximize the byte by amplifying its flood via DNS reflection attacks. The process is done in multi-steps:

1. First, you assume the identity of the targeted router’s IP address by forging it.

2. Use the forged identity to send numerous DNS queries to a DNS resolver.

3. Each query’s information is sent back to the targeted router after processing. Nonetheless, the data packets sent back by the DNS resolver are voluminous compared to the sent queries.

Typically, every single bite of data gets amplified to 30 or 40 bytes. Sometimes amplification surpasses these parameters. If you have access to botnets, you can amplify the traffic further to bring down the router or even a website.

Types Of DDoS Attacks

The Denial of service attacks come in two broad categories hinging on the vector of the attack. The categories are:

1. Application Layer.

2. Network Layer.

Application Layer Attacks

Application layer attacks target particular software or programs routinely used by the device or websites.

Application layer distributed denial of service compromises one of the two used commands (POST and GET) commands to bombard the device or website with overwhelming requests that are difficult to handle.

Network Layer Attacks

This type of DDoS attack focuses its energy on flooding the infrastructure hosting a website with unbearable data.

These kinds of layer attacks come in numerous sizes and shapes. Below are the common ones:

1. UDP Amplified Attacks.

2. SYN or Synchronize Attacks.

3. DNS Reflecting Attacks.

The disadvantage of amplified attacks DDoS attacks is that a massive amount of traffic bombards the victims; thus, it is easier to identify the type of attack facing them.

Additional Distributed Denial Of Service Attack Tools

Here are the additional tools available for you to use in launching DDoS Attacks:

1. Nemesy– the Nemesy tool is used in generating random packets and is compatible with windows. Download the tool online. However, if your computer is equipped with antivirus, it will detect the program as a virus.

2. Land and La Tierra- the land and La Tierra tool can be effectively used to spoof the IP address and open TCP connections.

3. Blast- the blast tool is fatal in performing DDoS attacks and is readily available for download.

4. The Panther tool- if you desire to flood your target’s network or device with UDP packets, the panther DDoS attack tool is your ideal companion.

Ways Of Guarding Your Router Against DDoS

Ways Of Guarding Your Router Against DDoS

Generally, it isn’t easy to protect your router from becoming compromised. However, you can take the following measures to maximize its security:

1. Use a robust firewall to thwart crooks from identifying your router’s IP address.

2. Ensure all devices connected to the internet have an up-to-date antivirus to guard them against DDoS attacks.

3. Update your operating system at all times.

4. Ensure that your router’s software is up-to-date

5. Update all your voice chart programs.

6. Avoid using third-party servers.

7. Use a VPN.

Conclusion

Launching a DDoS attack on a router is doable. Everything connected to the internet is at the mercy of denial of service attacks from cyber crooks. The process might be complicated and expensive for armatures, but it is not rocket science; thus, you can do it. However, be aware that DDoS attacks are not an excellent game regardless of the endgame.

Leave a Comment