Do We Need Android Terminal Commands?

Do We Need Android Terminal Commands?

A typical Android developer will need to execute commands. With the help of terminals, we can run commands efficiently. These are also helpful in the communication of our devices. As many of the commands are handy, it enables us to access them without much trouble. Hence, we need terminal commands more than we think we do.  

Do We Need Android Terminal Commands?

Here Are The Top 10 ADB Commands Everyone Should Know.

Android Terminal Command     Key Feature
The adb devices command Examines communication between the devices.
The adb push command Moves a file onto devices programmatically.
The adb pull command Pulls the received files into the devices.
The adb reboot command Reboots device from the command line. 
The adb reboot-bootloader and adb reboot recovery commands Very handy and reboots devices to the bootloader. 
The fastboot devices command Commands can be executed at  a good speed.  
The fastboot unlock command Unlocks the bootloader 
The  adb  install command Installation of apps .
The adb sideload command Download of an update in the form of zip file .
The adb Shell commandWorks in two ways to execute commands.

1. The ADB Devices Command.

This command is specifically designed to make sure that your computer and Android devices are in communication. It tops the list due to its work efficiency. You don’t have to be a pro for operating systems on your computer with this tool. 

You can quickly start up your terminal or command console and direct it to where you have put the extract tool that you installed. 

You are in the right folder if you get a serial number. If you are not getting the serial number, it means you are in the wrong folder, or there might be a mistake during the device driver’s installation. For Windows users, it is necessary to turn on the debugging option in your device. 

2. The ADB Push Command.  

This command will help you to move any file onto your Android device programmatically. You should know some essential points while moving files with this command, like the full path of the file you want to move and the full path of the section where you want to place that file. 

It would help if you considered the file path’s slashes and quotes while moving the specific file. If filenames constitute spaces and special characters, you should encase the path in quotes. 

3. The ADB Pull Command.

You will need this ADB Pull Command for your device to pull down the files sent by the ADB push command. In the process of sending and placing a file in its appropriate place, you must know how to access these two commands. 

You should know both the path of the file that you want to move, as well as the path you want that file to be placed into. It will drop the file into your tools folder quickly when you leave the destination path blank. To resist any problem, you must remember your forward slash versus backward slash rules here. 

4. The ADB Reboot Command. 

However, this command works specifically; you may imagine a way to bring up your device from your instruction. You have to type ADB Reboot and enter. This command is as straightforward as that. 

You must understand that these commands are often written, and your device may reboot in the middle of a script. It’s a sensible choice to make as to when you would like this to be done. 

5. The ADB Reboot-Bootloader And ADB Reboot Recovery Commands. 

With this command, you will specify that your device has been rebooted to the bootloader. This can be comparatively handy, sometimes these button combos are touchy, and if you have more than one device to work on, it will become laborious to recollect all. Without the help of this command, some devices cannot boot to the bootloader. It is very effective to use this command while working on a script. 

Working on this command is easy, type ADB reboot-bootloader and face the enter button. ADB Reboot Recovery additionally helps some devices to boot into the recovery directly, whereas some can’t. Anyone can give a try to this command.  

6. The Fastboot Devices Command.  

This command could be a lifesaver when ADB suddenly stops operating while you are working inside the bootloader. The problem of inactivation of Debugging tools to communicate with while you are not even booted into Android can be solved with this command’s assistance. 

Not each device finds it easy to access this command; once your device is in a position to try it, make sure to check its communication strategy. That’s the means of working with this tool. 

Type fastboot devices at the given prompt, and you will get a serial number. Same as ADB devices command, which we have discussed earlier. 

If you bump into any driver issue and things don’t seem to be operating well in your Windows, make sure to get help from the manufacturer. 

7.  The Fastboot Unlock Command. 

The fastboot command helps to reset your device while erasing everything present before. 

One of the prominent Android commands, The Fastboot Unlock Command, mainly focuses on unlocking the bootloader. Unlike other commands, this command is enabled in some specific phones. 

Google Play access will not have any problem with what you are doing with Google unless you go against its rules. It shows the vast openness of Android devices. It is an easy way to clear the problem, even when you don’t support the phone’s manufacturer company. 

When you want to start with it, type fastboot flashing unlocks at the prompt and tap enter. Now you are ready to use this command and be sure everything is in communication.  

8. The ADB Install Command.  

The ADB Install Command mainly helps to install files into your Android device that are copied through ADB push. You need to provide the path that contains the apk file saved, then run it. 

When you are updating an app, this command will surely make it a comfortable experience. Here you get an additional option, which you can install into an SD card. With this command, you can uninstall any app by their package name. It has an option too. This option can uninstall the app leaving all the app data and relevant cache in place. 

9. The ADB Sideload Command. 

This command can modify your phone to download an OTA ( on-the-air) update in the form of a zip file. Even though your phone cannot push the update, that zip file can be installed manually with this tool. It clears the matter of waiting to download an updated version. It is a handy command where you can enhance your phone’s accessibility. 

You can simply install the update into your computer and plug your phone into the pc. Recover your device through rebooting, and using the up and down volume buttons opt for Apply update from ADB. Now head to your favourite command line and type ADB sideload and hit enter. This is all, and you can leave the rest to the current tool. 

10. The ADB Shell Command. 

Most of the users of this command get confused. Thanks to its two ways of operating, it becomes robust to grasp completely. One way is where you send a command to a device to run in its command-line shell, and the other way is where you enter the device’s command shell from your terminal. 

At the prompt line, type ADB Shell, and you will be able to access it now. It is effortless to reach there. It would help if you were very cautious while working on this command because it is probably easy to crack into issues with this command. 

If you are not familiar with this, we recommend taking every step carefully to avoid a bad experience. The other way of using this ADB Shell Command is to inform your phone to run a shell command, even while not getting into the shell. It is an easy way to use this command. 


1. What Are The Benefits Of Android Terminal Commands? 

With the assistance of Android terminal commands, we can communicate with our devices. This helps to run your commands among the particular shell smoothly.

2. How To Use A Command On The Phone?

You can simply operate any command by following the needed guidelines on your phone. It is effortless for anyone to use these commands. You need to personalize your choice and opt for the best one. 

3. Are Android Terminal Commands User Friendly?  

Most of the commands are designed for advanced terminal programmers. However, fortunately, a number of them are easy to use. At the beginners’ level, we need to understand the work of these commands to access them.